The fault performance of three kinds of situations:

First, the deviation to the same side of the conveyor belt are under no-load and load conditions, ie, transverse centerline deviation conveyor, conveyor belt material less biased side; the second is the conveyor belt left, Right deviation and no fixed direction; the third is in the middle of the entire conveyor belt conveyor belt conveyor deviation.

Uneven foundation, Pinto roll sticky material, grooved rollers about unbalanced and active and passive roller conveyor adjust the imbalance will cause deviation unit. If you are wandering to the same side of the conveyor belt in case of no-load and load, indicating the tightness is not the same on both sides of the conveyor belt or rack uneven. In this case, the rack infrastructure should first leveling, clearing sticky material Pinto roller, adjustment screw or counterweight tensioning mechanism. If the conveyor belt around a fixed direction without deviation, then the conveyor belt slack tensioning mechanism should be adjusted.

concrete batching plant conveyor Adjustment: If the conveyor belt to one side, the side should conveyor idlers lateral shift forward direction, but also the other side of the roller group moved back . Return idlers and carrying idlers adjusted the same way. For long belt conveyor system, adjust roller group is very effective.Idler pulleys adjustment is an important part of the conveyor belt deviation adjustment, the mounting position of the drum must be perpendicular to the conveying direction of the conveyor centerline, otherwise inevitable deviation. if the right side of the conveyor belt to their wandering, they should be on the right side of bearing seat forward ; if the conveyor roller deviation to the left, you should forward on the left side of the bearing.