The configuration of an hzs90 concrete batching plant includes a concrete mixer, a batching machine, a weighing system, cement silos, a control system, etc.

　　JS1500 concrete mixer

　　JS1500 concrete mixer is a large and medium-sized mixer, which is mainly suitable for larger construction projects and very important construction machinery in the city. It is a kind of compulsory horizontal shaft mixer. It can not only mix dry hard concrete, but also mix light aggregate concrete. It is a multifunctional mixer.

　　The main engine steel structure is made of large-scale rectangular pipe and thick steel plate, forming a rigid frame structure shaft end seal with labyrinth and floating sealing ring. The special air pressure seal protection device at the end of the shaft, adding more protection to the original protection of the mixer, makes the mixing shaft more durable and reliable. Rated capacity not exceeding mixing shaft, making shaft end seal more durable. The design of large capacity shows that the feed capacity is 2.25m3 and the discharge capacity of dense concrete is 1.5m3. The design of multi mixer (more than two knives more than traditional products) makes the concrete mixing more uniform.

　　PLD1600 concrete batching machine

　　The PLD1600 concrete batching machine can mix 2-5 kinds of materials, the weighing hopper has a capacity of 1600 liters, the storage hopper has a capacity of 5m³ each, and the maximum weighing value is 3T; the batching machine can effectively ensure the accuracy and weighing of the ratio The speed of the volume is a new type of concrete batching machine.

　　Aggregate silo total volume: 48m3, divided into three identical silos, each silo volume is 16m3. Each aggregate bin is equipped with two discharge doors to realize coarse and fine weighing, and the actuator is the cylinder and solenoid valve of Yadeke or jiefite series. The aggregate bin is set as one second bin and two stone bins, in which the sand bin is set with two vibrators, the aggregate weighing hopper is set as three, and the effective volume of each hopper is 1.4m, which is measured separately. The sand bucket body is equipped with a vibrator (WAM), and the weighing sensor is Toledo / Medea

　　Belt conveyor

　　The frame is of large angle steel truss type, with the inclination of support frame of 20 in the middle, the belt conveyor length of about 40 meters, and five layers of nylon rubber belt with falling tension device, with thickness of 10 mm, width of 800mm and length of about 90 meters, and conveying capacity of 600t / h. The belt conveyor is sealed with 3mm thick glass color steel plate, and the material receiving groove plate is set under the belt. The belt conveyor is equipped with 650mm wide maintenance walkway on both sides, and is equipped with rope pulling emergency stop switch and anti deviation switch. The driving power of six belt conveyor is 30kW, which is driven by external mounted type of reducer (Tiande or Talon), with check device.

　　The standard configuration of an hzs90 concrete batching plant includes a JS1500 concrete mixer, a PLD2400 four-bin batching machine, a cement weighing set, a fly ash weighing set, a water weighing set, a set of additive weighing, a set of external additives mixing tank, a set of aggregate belt feeder and midway storage bins, three LSY219-8M screw conveyors, three 100-ton cement bins, a gas circuit system, a circuit system, and a full-automatic control system.